Announcements:

ADD-ON DEVICE

The additional RS232 port opens up a world of possibilities for iCAMView PRO. With an addition of software and appropriate protocols iCAMView PRO can be programmed to provide both remote control-ability and visual confirmation.

The following three devices are made to demonstrate these capability;

NetFeeler Mini | Analog-Digital-Input-Output | BioMetric Sensor | PoE Injector

NetFeeler Mini


NetFeeler Mini	Wireless Door/Window Sensor	Wireless Smoke Sensor

This device is designed as an environmental monitoring center. Modeled after it's larger predecessor, NetFeeler Lite, the mini version is capable of detecting changes in Temperature, Humidity and receive signals from 8 RF sensors. When any one of these sensors sends out a signal, NetFeeler Mini alarm will sound and sends out an email notification thru iCAMView PRO (HCV74 or HCV91). The user can then log into iCAMView PRO to remotely monitor the situation using a standard web browser.

The user can also opt to expand NetFeeler Mini monitoring capabilities, by adding a Wireless Smoke Sensor, Gas Sensor and use with up to 7 door/window sensors.

NetFeeler Mini Network Diagram

Features:

On board LCD to display current temperature and humidity reading.
Built-in sensors to detect changes in surrounding temperature and humidity .
Built-in wireless RF sensor.
Use with Wireless Smoke Sensor to detect presence of smoke.
Use with Wireless Security Sensor to detect unauthorized access.
Monitor changes in environment thru the internet.
Able to send TRAP notifications via email.

Temperature Specification:

Detection Range :	-40°C to +125°C
Accuracy :	±1°C
Response Time :	10 seconds in moving air

Humidity Specification:

Detection Range :	0 to 100% Relative Humidity Non-Condensing
Accuracy :	±0.5% Relative Humidity
Response Time :	15 seconds in moving air.
Temperature range :	-40°C to +85°C (-40°F to +185°F)

Radio Frequency (RF) Specification:

RF Range :	30 Metes clear line-of-sight
Frequency :	315 Mhz
Receiver Sensitivity :	-106dB

[Back to top]

Analog-Digital-Input-Output ("ADIO") Adaptor

ADIO is a sensor collector and transmitter. It is designed to use with dry contact (digital) or DC analog equipment or devices. With the ADIO these devices can now be accessed and controlled from the internet via iCAMView PRO webpage. The user can then receive data, warning emails with picture attachments when an event occurs. The user can also use the ADIO to control other DC analog devices.

Features:

Support 16 channels for voltage input and output OR 8 channels analog input.
0V to 4.096V detection range in 8-bit / 10-bit / 12-bit resolution for analog input.
Connect sensors via a RS232 port.

[Back to top]

BioMetric Sensor

Biometric Sensor can be connected to iCAMView PRO via RS232 port. The sensor can be used in either fingerprint safe, fingerprint door lock, as an access control or in an IC card system. It is also suited for POS machine, attendance register, device lock and etc...

This feature is for OEM only.

[Back to top]