| Welcome Guest! Would you like to log yourself in? Or would you prefer to create an account? |
 |
iCAMView is an affordable solution to your surveillance and security needs. It allows the user to stream live video images to the internet without a PC. It acts as your server / gateway to the internet specifically for streaming live video images. In addition to eliminating the need for a PC, the user also enjoys greater flexibility. It's compact size (48mm x 63mm x 21mm), allows the device to be easily installed almost anywhere. The two USB ports also allows you to mix and match different camera to suit your security needs.. Among some of it's standard capabilities include motion detection, image recording, event logging, account & password settings, emailing events, and etc... You can also record detected motion onto your local hard drive. iCAMView can handle up to 30 viewers per USB camera and can set up to 8 user accounts.
 |
| Features of iCAMView Plus
Model: iCV-22 (HCV73)
Set up to 5 different HotSpots
4 more Patrol features including patrol hotspots.
Support Pan Tilt function on PPC, PDA phone or symbian phone.
Resolution options, up to 640x480
Motion Tracking
Digital Pan&Tilt with static camera.
Advanced Motion Detection (based on imaging).
Zoom to custom window.
Scroll bar for digital zoom.
Monitor custom window.
Additional language support.
more camera brand support.
see what else is different in the following table of comparison.
Read more...
|
|
| The Future of iCAMView: The PRO version
The standard version, iCAMView Plus (v2.5x), allows the user to remotely monitor an area.
However, iCAMView PRO takes this to an all new level by incorporating a number of new
features;
1. Ability to bypass NAT and view directly,
2. Ability to connect to add-on devices, such as; NetFeeler Mini, ADIO and biometric sensors,
For more information about iCAMView PRO Add-On Click Here.
3. Ability to add other USB devices such as; Wireless USB dongle, USB hub and USB flash disk for local storage.
For more information about iCAMView PRO Click Here.
|
|
Basic Features of all iCAMView models:
No need to install software to locate unit within your LAN.
Just look at the LCD which will display your current IP!
View images from your web enabled PDA / mobile phone.
Bundled utility to locate unit installed in inaccessible location.
Monitor multiple iCAMView using iMultiView (Windows based freeware).
Flexible Motion Detection and Image Recording functions.
Email notification for Motion Detection, daily report, etc...
Configure up to 4 viewing time frames (Permit Hours).
Able to display multiple images on a single screen.
Support up to 30 simultaneous remote viewers per USB camera.
Display viewer's IP, account, viewed camera, login time and total downloaded bytes.
Detailed event log with listing options.
Event listing by Level and Type.
Limit the max FPS to each of the 8 user account.
Number of Viewers control per USB camera (max of 5 viewers/camera)
Block / black-list up to 256 IP addresses from accessing iCAMView.
Schedule up to four time slots when motion detection is active.
Upload motion detected images to a specified FTP server.
Schedule up to two time slots for image forwarding (to email or FTP server).
Update firmware directly from iCAMView webpage.
Save current settings to a file making settings recall easy.
How does iCAMView connect to the Internet?
The following diagram illustrates three common network configurations for iCAMView;
1. iCAMView is connected to a Router/IP share and Cable/xDSL modem to stream video to the internet. This is the most common configuration where a Router is used. The Router Port Forwarding has to be configured to allow Public access to iCAMView.

2. iCAMView is connected to a HUB and a Cable / xDSL modem. In this setup, the user will need to setup PPPoE within iCAMView. Enter the username and password as provided by the ISP to allow iCAMView to dial-up to the internet.
3. iCAMView is connected directly to a Cable / xDSL modem. Similiar to configuration above, the PPPoE section in iCAMView will have to be configured to allow access to the internet. In addition, the user will have to setup a DDNS account (choose from the list provided by iCAMView Setup Wizard)
|
 |
 |
New Products For December |
 |
|
|
|
 |
| 0 items |
 |
|
|
 |
Bestsellers |
 |
|
|
|
 |
Languages |
 |
|
 |
Currencies |
 |
|
|